Controls Engineer Resume Examples
Writing a great controls engineer resume is important because it is one of the first things a potential employer will see when they are considering you for a position. It is your opportunity to make a good first impression and sell yourself as the best candidate for the job.
Create your resume
Select from 7 professional resume templates
If you're looking for inspiration when it comes to drafting your own controls engineer resume, look no further than the samples below. These resumes will help you highlight your experience and qualifications in the most effective way possible, giving you the best chance of landing the controls engineer job you're after.
firstname.lastname@example.org | (620) 837-5426 | San Diego, CA
I am a controls engineer with over 4 years of experience in the oil and gas industry. I have experience designing, commissioning, and troubleshooting control systems for various process units. I am familiar with a variety of DCS and PLC platforms, as well as HMI/SCADA software packages. In addition to my technical skills, I also have strong interpersonal and communication skills which allow me to effectively interface with other engineers, technicians, operators, and management personnel.
Controls Engineer at Honeywell, CAJun 2022 - Present
- Implemented a new control system for the production line that increased efficiency by 15%.
- Reduced downtime on the production line by 20% through improved controls and monitoring.
- Developed a predictive maintenance program that reduced unscheduled downtime by 30%.
- Implemented process improvements that resulted in a 10% reduction in product defects.
Associate Controls Engineer at , CAJul 2018 - Apr 2022
- Led the development of a new control panel that is now used in all production vehicles.
- Wrote software code for 30+ vehicle models that was implemented across 5 factories worldwide.
- Developed an algorithm that increased assembly line efficiency by 15%.
- Trained 10 junior engineers on best practices for controls engineering.
- Presented at 2 international conferences on advances in automotive controls engineering.
Bachelor of Science in Electrical Engineering at University of California, BerkeleyAug 2014 - May 2018
I've learned how to design, analyze, and troubleshoot electrical and electronic circuits and systems.
- OPC UA
email@example.com | (158) 885-3924 | Reno, NV
I am a Controls Engineer with over 4 years of experience in the industry. I have gained valuable knowledge and expertise in this field, and I am able to apply my skills to various projects. I have a strong understanding of controls systems, and I am able to design and implement effective solutions that meet the needs of my clients. In addition, I have excellent problem-solving skills that allow me to troubleshoot issues quickly and efficiently.
Controls Engineer at Siemens, NVMay 2022 - Present
- Successfully designed and implemented a control system for a manufacturing process that increased throughput by 15%.
- Successfully led the team in designing and implementing a new safety system that reduced accidents by 25%.
- Successfully optimized an existing control system, resulting in 10% increase in efficiency.
- Successfully designed and executed several experiments to validate various aspects of the control systems, which resulted in improved performance.
Associate Controls Engineer at ABB, NVSep 2018 - Mar 2022
- Successfully installed and tested a new control system for the manufacturing process, which increased production by 10%.
- Successfully designed and implemented a PLC program that improved machine efficiency by 15%.
- Successfully debugged and resolved over 100 issues with the existing control systems.
- Developed training materials and trained other engineers on how to use the new control system.
- Assisted in developing company-wide best practices for controls engineering.
Bachelor of Science in Electrical Engineering at University of Nevada, RenoSep 2014 - May 2018
Some skills I've learned are circuit analysis, probability and statistics, linear algebra, and calculus.
- PLC Programming
- HMI Development
- Motion Control
- Electrical Design
- Instrumentation and Calibration
- Data Acquisition and Analysis
Essential Components of a Controls Engineer Resume
For Controls Engineers, a resume is a critical tool that showcases expertise in developing and implementing automated systems. It's the first impression for potential employers, so it's essential to emphasize key elements such as relevant experience, technical skills, certifications, and education. A well-structured and concise resume can capture the attention of hiring managers. Below, we delve into the essential sections of a controls engineer resume, discussing their significance and content, and providing tips to make each section stand out.
1. Contact Information
Ensure your Contact Information is accurate and easily accessible, as this is how employers will reach out to you. Include your full name, phone number, and a professional email address. Consider adding your LinkedIn profile and any professional websites showcasing your work or certifications.
Avoid personal details irrelevant to the job application, and place this section prominently at the top of your resume.
2. Objective Statement
The Objective Statement sets the tone for your resume. Positioned just below your contact information, it should succinctly convey your career goals and how you can add value to the employer. Tailor it to each job application, ensuring it aligns with the job description.
Make this section compelling and concise, as it's often one of the first things a hiring manager reads. It should reflect your professional aspirations and how they fit with the company's goals.
3. Education and Certifications
The Education and Certifications section is crucial, highlighting your academic background, specialized training, and relevant certifications. Detail your engineering degrees, any additional training in automation-related areas, and professional certifications like CCST or CAP. Showcase your commitment to ongoing education and the skills pertinent to the job, such as proficiency in AutoCAD, MATLAB, or LabVIEW.
Related: Controls Engineer Certifications
4. Relevant Skills and Expertise
In the Key Skills and Knowledge section, list technical skills and industry knowledge tailored to the job you're applying for. Include expertise in PLCs, SCADA systems, coding languages, electrical engineering concepts, project management, problem-solving, and communication abilities. Provide examples that demonstrate your skills in action.
5. Work Experience in Controls Engineering
The Work Experience section provides a detailed look at your career trajectory. List past positions in reverse chronological order, emphasizing responsibilities and achievements. Use action verbs and quantify successes to illustrate your impact. Mention industry-specific tools and software you're experienced with, and if applicable, diverse sectors you've worked in.
6. Project Accomplishments or Portfolio
The Project Achievements or Portfolio section allows you to showcase significant projects and their outcomes. Include project overviews, your role, tools used, and results achieved. Visuals like diagrams or photos can enhance this section by providing concrete evidence of your capabilities.
7. References or Professional Affiliations
List Professional Affiliations and References to give employers insight into your professional network and endorsements from third parties. Include memberships in relevant organizations and contact details for references who can attest to your qualifications and work ethic. Ensure these individuals have agreed to be listed as your references.
By focusing on these key sections and presenting your information clearly and effectively, your resume will stand out to potential employers, showcasing your qualifications as a Controls Engineer.